- 您现在的位置：买卖IC网 > Sheet目录536 > X3C09E2-20S (Anaren)COUPLER 90DEG 800-1000MHZ 20DB
Model X3C09E2-20S
Rev A
Peak Power Handling
High-Pot testing of these couplers during the qualification procedure resulted in a minimum breakdown voltage of
1.50kV. This voltage level corresponds to a breakdown resistance capable of handling at least 12dB peaks over
average power levels, for very short durations. The breakdown location consistently occurred across the air interface
at the coupler contact pads (see illustration below). The breakdown levels at these points will be affected by any
contamination in the gap area around these pads. These areas must be kept clean for optimum performance. It is
recommended that the user test for voltage breakdown under the maximum operating conditions and over worst case
modulation induced power peaking. This evaluation should also include extreme environmental conditions (such as
high humidity).
Orientation Marker
A printed circular feature appears on the top surface of the coupler to designate Pin 1. This orientation marker is not
intended to limit the use of the symmetry that these couplers exhibit but rather to facilitate consistent placement of
these parts into the tape and reel package. This ensures that the components are always delivered with the same
orientation. Refer to the table on page 2 of the data sheet for allowable pin configurations.
Test Plan
Xinger III 20dB couplers are manufactured in large panels and then separated. A sample population of parts is RF
small signal tested at room temperature in the fixture described above. All parts are DC tested for shorts/opens. (See
“Qualification Flow Chart” section for details on the accelerated life test procedures.)
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape and
Reel for Pick and Place
Manufacturing.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
X3C09P1-03S
COUPLER 90DEG 800-1000MHZ 3DB
X3C09P2-03S
COUPLER 90DEG 800-1000MHZ 3DB
X3C09P2-30S
COUPLER 90DEG 800-1000MHZ 30DB
X3C19E2-20S
COUPLER 90DEG 1700-2000MHZ 20DB
X3C19P1-03S
COUPLER 90DEG 1700-2000MHZ 3DB
X3C19P2-03S
COUPLER 90DEG 1700-2000MHZ 3DB
X3C19P2-30S
COUPLER 90DEG 1700-2000MHZ 30DB
X3C21P1-03S
COUPLER 90DEG 2000-2300MHZ 3DB
相关代理商/技术参数
X3C09E2-20S-CT
制造商:Anaren Microwave 功能描述:RF DIRECTIONAL COUPLER
X3C09F1-03SR
制造商:Anaren Microwave 功能描述:RF HYBRID COUPLER
X3C09F1-03S-R5
制造商:Anaren Microwave 功能描述:RF HYBRID COUPLER
X3C09F1-20S
功能描述:COUPLER DIRECT 700-1000MHZ 20DB 制造商:anaren 系列:Xinger III? 包装:剪切带（CT） 零件状态:在售 耦合器类型:标准 频率:700MHz ~ 1GHz 耦合系数:20dB 应用:通用 插入损耗:0.075dB 功率 - 最大值:25W 隔离:- 回波损耗:- 封装/外壳:4-SMD，无引线 供应商器件封装:- 标准包装:1
X3C09P1-03S
功能描述:信号调节 800-1000MHz IL:.22dB VSWR:1.15 -55 to 95C
RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel
X3C09P1-03S-CT
制造商:Anaren Microwave 功能描述:RF HYBRID COUPLER
X3C09P1-03SR
制造商:Anaren Microwave 功能描述:HYBRID COUPLER 3DB 90 DEGREE 800-1000MHZ
X3C09P1-03S-R
制造商:Anaren Microwave 功能描述:RF HYBRID COUPLER